Lorenz Deepmax Z1 Metal Detector

Lorenz Deepmax Z1 Metal Detector
Technical Specifications:

Dimensions
Carrying Case : 15″ x 11″ x 8″ (400 x 300 x 220 mm)
Electronics Control Box : 4″ x 4″ 3″ (120 x 122 x 85 mm)
1m x 1m Frame Coil (collapsed) : 42″ x 5″ x 5″ (1080 x 150 x 150 mm)
S-Rod Length : Extended 61″ (1550 mm), Collapsed 40″ (1030 mm), Disassembled 27″ (690 mm)
Weights
Y-Adapter Cable : Approx. 0.22 lbs (0.1 kgs)*
Telescopic S Pole : Approx. 1.3 lbs (0.6 kgs)
Electronics Control Box : Approx. 2.86 lbs (1.3 kgs)
14″ (35cm) DD Search Coil : Approx. 1.76 lbs (0.8 kgs)*
Carrying Case with Deepmax Z1 Inside : Approx. 16.5 lbs (7.5 kgs)
40″ x 40″ (1m x 1m) Double Frame Coil Kit : Approx. 16 lbs (7.3 kgs)*
Universal Cable Coil 26″ (8 m) Perimeter : Approx. 1.32 lbs (0.6 kgs)*
Universal Cable Coil 40″ (12 m) Perimeter : Approx. 1.98 lbs (0.9 kgs)*
40″ x 40″ (1m x 1m) Frame Coil with Cable Inside Tubes : Approx. 5.7 lbs (2.6 kgs)*
Shoulder and Belt Strap with Mounted External Battery Pack : Approx. 7.49 lbs (3.4 kgs)
*All Weights Taken with Connecting Cable and Connector! Coils Ranging from 10″ to 18″ (26cm to 45cm) in Diameter
Need a Telescopic S Pole for Operation

Electrical Data
Detection Depths : See Chapter 11 of Operating Manual
Operating Temperature : 23°F to + 122°F (- 5°C to + 50°C)
Power Source : External Rechargeable Battery 12V / 7-8Ah
Battery Charger : Charger with 90-265V AC / 50-60Hz for World-Wide Operation
Usage Time : Approx. 5 to 10 Hours Depending on Temperature and Connected Coil
Recharge Time : Approximately 8 Hours Depending on Battery Condition and Ambient Temperature
Search-Frequency with Small / Large Search Coils Connected : Approx. 2000 / 1000 Pulses Per Second
Audio Target Response Voltage Controlled Oscillator (VCO) and Volume / Threshold Control : 0 – 4000 Hz
Data Logger: Multiple Channel Data Acquisition, Supported by GPS
Resolution : 24 Bit
Number of Fields : 99
Sampling Rate : 12 Per Second
Field Length : Max. 328′ (100 m)
Storage Media : Internal Memory
GPS Module
Date : WGS-84
Sensitivity : -162 dBm
Channels : 50 Channels
Frequency : L1, 1575.42 MHz
C/A Code : 1.023 MHz Chip Rate
Dimensions : 2″ x 1″ x .8″ (65 x 45 x 22 mm)
Protocol : NMEA-0183 V3.01 GGA, GSA, GSV, RMC, VTG
Operating Temperature :- 4°F to +140°F (-20°C to +60°C)
Target Precisions : Position Horizontal 2.5m CEP, 2.0m SEP with SBAS
The Lorenz Deepmax Z1 is practically service free. The electronics control box and the other components should always be kept clean and dry. This is particularly important for the plugs and sockets, which should never be stored when being wet. The electronics control box is water and dust protected but it should be avoided to immerse the unit in water. All search coils available for the Lorenz Deepmax Z1 are waterproof up to the connector. All the connectors should be kept dry. Design and specifications subject to change without notice!

Lorenz Deepmax Z1 Metal Detector  Features:

Waterproof Search Coils
Exact Pinpointing with Large Coils
Highly Sensitive to All Kinds of Metal
Battery Check with Audio Alarm Tone
Precisely Adjustable Audio-Threshold
Stable Static Response (acoustical and visual)
Improved Ferrous / Non-Ferrous Identification
Automatic Ground Calibration Re-tuning Facility
Very Easy and Effective Detection of Large Areas
New Search System Circuitry with All New Functions
Extreme Detection Depths for Very Large Metal Objects
Fast Audio Response Speed with Different Audio Settings
Car Charger for 10-30V DC Supplies Available as Accessory
Small Unwanted Metal Objects can either be Identified or Eliminated
High Dynamic Range for Extreme Ground Signals and Easy Pinpointing
A Variety of Search Coils are Available for Different Detection Purposes
Fast Charge Electronics for Worldwide Operation 90-265V AC / 50-60Hz
Reliable / Simple Operation with Few Controls and Customized LC Display
Single or Dual Induction Balanced or Differential Coil Designs can be Used
Frequency and Filter Function for Low Frequency EMI Interference Elimination
Automatic Adaptation of Different Coil Sizes and Coil Designs to the Electronics
Logarithmic Audio Response and Intensity Bar Graph Reading for Easy Pinpointing
Specialized on Gold and Improved Detection Range on Low Conducting Metal Pieces
Low Frequency Interference Elimination Circuitry for Less Interference in Urban Areas
Different Delay and Sensitivity Settings to Eliminate Small Objects or for Easy Pinpointing
Rugged, Refined Mechanical Construction with Water and Dust Protected Electronics Unit
Stable Operation on Mineralized Ground or Salt Water with Pulse Ground Balancing System
Optimal Performance for the Detection of Small Objects like Coins or other Non-Ferrous Objects
Calibrated Static (non-motion) Target Classification with Visual Conductivity / Time Delay Reading
Interchangeable Rechargeable NIMH Battery Pack for Worldwide Operation, Declared as Dry Cells
GPS Based Meter, Track, Field and Compass Heading Information, Makes it Easy to Work with the Data Logger
Multi-Sensor Detection (MST) with Several Search Coils Working at the Same Time without Interfering With Each Other
Signal Strength Bar Graph, Time Delay Reading, Ferrous / Non-Ferrous Icons, Battery Condition and all the Mode Settings are Displayed Simultaneously on a Large LC Display
Easy to Use Data Logger Function Works with Optional Hard – and Software Kit to Generate Six 2D Images and Six 3D Surface Maps from the Scans being Taken. Each Map is Different Depending on the Electronic Analysis Method and Therefore can be the Key to the Probable Kind of Metal Buried in the Ground